Featured image 2
Featured image 3
Featured image 4

The client commissioned the refurbishment of their solid maple kitchen worktop and an oak window ledge that bore stubborn marks from an iron pot.

The worktop was a large L‑shaped configuration with an integrated sink and gas hob. I carefully masked off both appliances, then used my Mirka sander and dust extractor — which captures 99% of sanding dust — making it ideal for working indoors.

I began with 80‑grit paper to strip away the old finish, then focused on the woodwork itself. Spraying water between sanding stages raises the grain fibres, making them easier to smooth down. After a full day’s sanding, the surface was clean, beautifully even, and ready for its first coat of oil.

Before finishing the worktop, I refurbished the oak ledge. Again starting with 80‑grit to remove the previous finish, I then worked to erase the dark stain. A few hours of wetting and sanding restored the oak’s natural warmth — the mark was completely gone.

Both pieces received their first coat of Osmo Kitchen Counter Oil and were left to dry overnight. This process was repeated over the next three days, followed by a final light buff with 3000‑grit paper to ensure a flawless finish. The surfaces then cured fully for one week — a perfect opportunity for the clients to enjoy some meals out!

The result: a fully refreshed maple worktop showcasing its original grain and natural hue — the Osmo oil enhances rather than alters the colour, while providing durable, long‑lasting protection. The oak ledge is equally transformed, with its grain clearly visible and not a mark in sight.

 

Send me an email to have a chat about starting a commission.

Looking for Something Similar?